Difference between revisions of "File:HighLevel.JPG"

From Elcano Project Wiki
Jump to navigation Jump to search
(The HighLevel circuit board is a shield for the Arduino Due. It handles localization (C6) route finding (C4) and Pilot (C3). It has sensors for GPS, INU, and Gyros. The SD card holds a digital map. Main communication is over CAN bus)
 
(No difference)

Latest revision as of 22:12, 4 June 2019

Summary

The HighLevel circuit board is a shield for the Arduino Due. It handles localization (C6) route finding (C4) and Pilot (C3). It has sensors for GPS, INU, and Gyros. The SD card holds a digital map. Main communication is over CAN bus

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current22:12, 4 June 2019Thumbnail for version as of 22:12, 4 June 20194,032 × 3,024 (2.21 MB)Tfolsom (talk | contribs)The HighLevel circuit board is a shield for the Arduino Due. It handles localization (C6) route finding (C4) and Pilot (C3). It has sensors for GPS, INU, and Gyros. The SD card holds a digital map. Main communication is over CAN bus
  • You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Retrieved from "https://www.elcanoproject.org/wiki/index.php?title=File:HighLevel.JPG&oldid=72"