File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 22:06, 4 June 2019 | LowLevel.JPG (file) |  |
2.05 MB | The LowLevel circuit board is a shield for the Arduino Mega. It supplies DAC, CAN bus, brake relays and interface to sensors. | 1 |
| 22:12, 4 June 2019 | HighLevel.JPG (file) |  |
2.21 MB | The HighLevel circuit board is a shield for the Arduino Due. It handles localization (C6) route finding (C4) and Pilot (C3). It has sensors for GPS, INU, and Gyros. The SD card holds a digital map. Main communication is over CAN bus | 1 |
| 22:15, 4 June 2019 | SonarArray.JPG (file) |  |
1.78 MB | The Sonar Array circuit board is based on the Arduino Micro. It houses 8 MaxBotix sonars in a 3D printed case. | 1 |
| 22:19, 4 June 2019 | Catrikes.JPG (file) |  |
2.47 MB | Elcano vehicles #1 and #2 are recumbent Catrikes modified so that electric throttle, brakes and steering are under computer control | 1 |
| 22:22, 4 June 2019 | ELF.JPG (file) |  |
4.01 MB | Elcano vehicles #3 is an Organic Transit ELF. | 1 |
| 18:57, 26 June 2019 | LowLevelV3.1 A.png (file) |  |
41 KB | Low Level Schematic Version 3.1 Sheet 1 | 1 |
| 18:59, 26 June 2019 | LowLevelV3.1 B.png (file) |  |
31 KB | Low Level Schematic Version 3.1 Sheet 2 | 1 |
| 19:06, 26 June 2019 | LowLevelV3.1 C.png (file) |  |
20 KB | Low Level Schematic Version 3.1 Sheet 3 | 1 |
| 19:07, 26 June 2019 | LowLevelV3.1 brd.png (file) |  |
75 KB | Low Level Board Version 3.1 | 1 |
| 21:42, 26 June 2019 | High-Level PCB v3.0.png (file) |  |
72 KB | High Level Schematic version 3.0 | 1 |
| 21:43, 26 June 2019 | High-Level PCB v3.0 brd.png (file) |  |
104 KB | High Level Board version 3.0 | 1 |
| 21:44, 26 June 2019 | SonarBoardV2.png (file) |  |
104 KB | Sonar Array Schematic version 3.0 | 1 |
| 21:45, 26 June 2019 | SonarBoardV2 brd.png (file) |  |
51 KB | Sonar Array Board version 3.0 | 1 |
| 19:06, 27 June 2019 | Scanse Sweep.JPG (file) |  |
1.64 MB | Scanse Sweep connected to Arduino Micro | 1 |
| 23:54, 27 June 2019 | OneWheelTester.JPG (file) |  |
963 KB | One Wheel Test Stand provides inputs to High Level board when the trike was not operational | 1 |
| 05:00, 28 June 2019 | Batteries.JPG (file) |  |
302 KB | Batteries | 1 |
| 16:21, 1 July 2019 | DC-DC converters.jpg (file) |  |
2.14 MB | The DC-DC converter box | 1 |
| 19:49, 1 July 2019 | Batteries-annotated.JPG (file) |  |
382 KB | Annotated battery and power photo | 1 |
| 23:45, 1 July 2019 | PowerOn.png (file) |  |
34 KB | Power On board: Kelly power-on, Hall phase conditioning, and brake PWM | 1 |
| 23:47, 1 July 2019 | PowerOnOnly.png (file) |  |
8 KB | Cut and jumpers for only Kelly power on and DC-DC converters. | 1 |
| 23:48, 1 July 2019 | PowerOn brd.png (file) |  |
51 KB | PowerOn board layout | 1 |
| 22:53, 8 November 2019 | Transceiver.png (file) | Error creating thumbnail: File with dimensions greater than 12.5 MP |
137 KB | Graphic of transceiver schematic. | 1 |
| 23:15, 8 November 2019 | Transceiver Brd.png (file) |  |
55 KB | Graphic of Transceiver board layout. | 1 |
| 05:18, 9 November 2019 | ScanseSweep.png (file) |  |
37 KB | Schematic for Scanse Sweep interface board. | 1 |
| 05:19, 9 November 2019 | ScanseSweep Brd.png (file) |  |
24 KB | Board layout for Scanse Sweep interface board. | 1 |
| 03:40, 14 July 2020 | Architecture CAN.png (file) |  |
249 KB | 3 | |
| 04:13, 14 July 2020 | Architecture CAN Sim 7 7 20.png (file) |  |
124 KB | Revised simulator diagram; omits sensors. | 1 |
| 00:17, 5 August 2020 | Marymoor.PNG (file) |  |
661 KB | Marymoor Park, Redmond, WA | 1 |
